Semplastics joins DOE-backed superhot geothermal project
Semplastics will contribute ceramic technology to a Blade Energy Partners-led project selected for award negotiations under DOE’s SUPERHOT program. The work targets heat-resistant well designs for superhot geothermal reservoirs that could expand baseload power output.
Why it matters: - Superhot geothermal resources could produce far more energy from each well than conventional geothermal systems. - The project targets drilling and well materials that can survive extreme heat and pressure, a key barrier to commercial use. - DOE says SUPERHOT could help deliver 10 to 20 gigawatts of baseload power by 2040.
What happened: - Semplastics said Nov. 18, 2026, that it will join a Blade Energy Partners-led project focused on superhot geothermal energy. - The U.S. Department of Energy’s Advanced Research Projects Agency-Energy selected the project for award negotiations under the SUPERHOT program. - The project is titled “Enabling Robust SHR Well Design and Construction.” - Semplastics will evaluate a ceramic foam as a thermal-insulating well liner for superhot geothermal reservoirs.
The details: - Semplastics will develop and test a rigid, machinable zirconia-toughened alumina ceramic foam for use as a thermal-insulating liner. - The material is designed to combine very low thermal conductivity and low density with resistance to rapid thermal shock. - The DOE says SUPERHOT is aimed at geothermal resources above 375 degrees Celsius and 22 megapascals. - The Blade Energy Partners team will develop and validate an integrated well system that includes new alloys, ceramic liners and advanced cements. - The system is intended to maintain well integrity for more than 15 years. - The project is one of eight selected to receive up to a combined $30 million through ARPA-E’s SUPERHOT program. - Blade Energy Partners is based in Houston.
Between the lines: - The project reflects a materials challenge, not just a drilling challenge. - Semplastics’ role points to ceramics as a possible substitute for conventional well materials that fail in extreme heat. - The 15-year durability target suggests the program is focused on commercial viability, not just lab performance.
What's next: - The team will move through DOE award negotiations and project development. - Semplastics will continue testing the ceramic foam for insulating performance under superhot conditions. - More information on the selected projects is available in ARPA-E’s announcement and on the SUPERHOT program page.
The bottom line: - Semplastics is positioning its ceramic materials for a hard engineering problem at the center of next-generation geothermal power.
Disclaimer: This article was produced by AGP Wire with the assistance of artificial intelligence based on original source content and has been refined to improve clarity, structure, and readability. This content is provided on an “as is” basis. While care has been taken in its preparation, it may contain inaccuracies or omissions, and readers should consult the original source and independently verify key information where appropriate. This content is for informational purposes only and does not constitute legal, financial, investment, or other professional advice.
Sign up for:
The Green Earth Gazette
The daily local news briefing you can trust. Every day. Subscribe now.
Check Your Email!
We sent a one-time activation link to: .
Confirm it's you by clicking the email link.
If the email is not in your inbox, check spam or try again.
Welcome back!
is already signed up. Check your inbox for updates.